Renewables First has designed and built fish passes throughout the UK and the Republic of Ireland, most often in combination with hydropower installations but also as standalone fish passes. We are a one-stop-shop for delivering fish pass projects; we can do the design, obtain the appropriate consents from regulatory bodies and construct the fish pass as well, so the client has a single point of contact from start to finish.
The most common fish pass design is a Larinier because it is multi-species and the width and baffle height can be adjusted (at the design stage) to suit a range of flow rates. Depending on the height of the obstruction to overcome, rest pools can be incorporated between the fish pass flights to allow fish to ascend the obstruction in stages without becoming exhausted. It is also possible to design a Larinier fish pass to work as a canoe pass which meets .
Alaskan ‘A’ fish passes are a type of Denil fish pass and are probably the second most common ‘modern’ fish pass type. Alaskan fish passes have relatively compact dimensions which lend themselves to fabrication in steel or aluminium, which means the main fish pass can be fabricated off-site and then lifted into position to speed-up the construction phase. Alaskan fish passes work well for salmonid fish but are less effective for coarse fish, particularly as the fish pass gets longer and/or steeper.
Pool & Weir / Pool & Traverse fish passes in one form or another have been around for many years and are effective for salmonid fish but less effective for other species. New fish passes tend to use a multi-species Larinier design, but in some applications, particularly where space is tight, a Pool & Weir fish pass can be a good choice. We have also been involved in improving and repairing existing Pool & Weir fish passes.
Non-technical fish passes
Most new fish pass designs would be one of the types above, but there are many other fish pass designs including some ‘non-technical’ fish pass designs such as Rock Ramp fish passes. Although not as experienced with these designs our knowledge of the more common fish pass types would mean that we could also design or work on the less-common designs if required.
Some fish passes require integrated fish counters, either for temporary validation that a new fish pass works or long-term monitoring. We have integrated a number for fish counter types into fish passes including resistivity counters and the Vaki Riverwatch system.
As well as standalone fish passes, Renewables First has designed a number of combined high-head hydro intakes and new weirs with integrated fish passes
When required we work with specialists fisheries consultancies to provide an initial fisheries impact study to determine the optimum overall strategy for a site to improve fish and eel passage. So, if you are looking for a new or refurbishment fish pass design with or without the construction services, please get in touch with Renewables First using the enquiry page and select ‘Fish and eel pass design’ as the enquiry type.
Are you considering a hydropower project ?
The first step to develop any small or micro hydropower site is to conduct a full feasibility study.
Contact us about a feasibility study today!
Once complete, you will understand the site potential and be guided through the next steps to develop your project. You can read more about hydropower in our Hydro Learning Centre.
Maximise the financial return of you hydropower system with GoFlo Travelling Screens. Find out more here.